REC02U (2020) Manual : simplebooklet.com

2 Contents ABOUT US .................................................................................... 3 THINK SAFETY FIRST ................................................................. 4 SYSTEM FEATURES ................................................................... 6 SYSTEM OVERVIEW ................................................................... 8 SYSTEM COMPONENTS ............................................................. 9 REMOTE OVERVIEW ................................................................ 10 USER LOGIN .............................................................................. 13 USER SETUP ............................................................................. 15 CHANNEL MODE ....................................................................... 16 DATE AND TIME (DATETIME) ................................................... 17 VEHICLE SETUP ........................................................................ 18 FORMAT SD CARD .................................................................... 19 RECORD SETUP ........................................................................ 20 MAIN CODE ................................................................................ 22 RECORDING SCHEDULE .......................................................... 23 DISPLAY SETUP ........................................................................ 24 OPTIONAL: ADD02CP ............................................................... 26 WARRANTY ................................................................................ 27 Verity Rear Vision System 56600 Twin Branch Dr., Mishawaka, IN 46545 www.verityrvs.com

Page 3

3 ABOUT US Verity does not just buy systems off the shelf overseas, put our logo on them, and ship them out. We work with engineers, some at our location in Mishawaka, Indiana to design camera systems to meet the safety needs of several industries. Where some companies just fall for the latest trend and bring untested safety equipment to the market, we perform the needed testing and often help factories make a better product for which we employ the ODM (original design manufacturing) method. We employ global engineers which help us offer the latest technologies. One step of every project we do is: “How will we defend it in court?” By doing extensive testing, we know our product is the best. We make our products Verity Safe™. Manuals, support materials and some assembly in USA; base unit made in China. Optional IR extender Control Panel

Page 4

4 THINK SAFETY FIRST Read our manual before operating or installing the REC02U. Verity products are intended to be installed as a supplement, and our observation systems and/or products are not intended to be a substitute for mirrors or other standard motor vehicle equipment which may be required by law. Verity products promote improving vehicle/driver operations. Our products are no substitute for proper driving techniques, observance of traffic laws, and motor vehicle safety regulations. Installation Location It is unlawful in most locals for any person to drive a motor vehicle equipped with a television viewer/screen located at any point forward of the back of the driver’s seat (or in any location that is visible, directly or indirectly to the driver) while operating the vehicle. Our systems are designed to be used primarily as a rear observation device. DO NOT OPEN ANY COMPONENT. There are no serviceable parts inside any Verity product. Opening the product will break the tamper indicators and void the warranty. If a problem should arise, please contact our technical support 574-807-6004. For faster response, fill out a service ticket found on our website. www.verityrvs.com

Page 5

5 WARNING  Do not pull cables tightly and add tension to them. A drip loop is required where applicable.  Do not place cables where they can be crushed in any manner. CAUTION  To avoid damage to the electronic circuit, stop using this product while doing welding work to the vehicle and/or trailers.  When cleaning monitors, cameras, and DVRs, use a damp lint-free cloth only.  Connect this unit only to other compatible Verity components.  Although our products have built-in surge and cross polarity protection, make sure all cables are connected properly. Improper cable connections may damage the DVR.  Cables should not be allowed to touch hot or rotating parts, such as the engine or exhaust.  Do not locate the DVR near heat-generating vents or devices.  Turn off power to the DVR when connecting the camera(s). DVRs and monitors are not designed to be waterproof. (Our SM07F waterproof monitor is the exception). Exposure to water, such as rain, may damage the unit.

Page 6

6 SYSTEM FEATURES Features: H.264 image compression encoding AHD 720P 4 channels of D1/960H/AHD 720P simultaneous audio and video recording/replaying 4- channel of 960H + 1- channel IPC 1080P HD camera full-framed recording Air video interface is used to provide high reliability and strong anti-seismic property 8-second delay recording during power failure Two SD cards supported 128 GB for each. 2 x 128GB = 256GB storage Unique inputs: 1 RS485 interface, 2 RS232 interfaces 8V-36V wide voltage DC supply High/low temperature resistant, operating under -25℃ / +70℃ System Language: English / Chinese Operation Interface: Graphical User Interface (OSD menu） Two-Level Password Security: Administrator or User Video Video-Input: Supports 4 channels CIF/HD1/D1/960H/720P camera video input Supports 2-CH 720P AHD + 2-CH 960H analog mixing Video input Supports 1-CH 720P/1080P IPC + 4-CH 960H/D1/CIF Video input Note: 4 channels 720P AHD or 1-CH 720P/1080P IPC + 4-CH 960H Video input will require high speed SD card ( > 80Mb/S, Class 10 or higher) Video Output 2 Channels: front panel 3.5mm Jack, 4-pin rear panel on 24 pin I/O Port. Video Display: Single picture, 1~5 pictures Signal System: PAL / NTSC - PAL@100 frame 720P/sec; NTSC@120 frame 720P/sec

Page 7

7 Audio Audio Input: 4 Channels Audio Output: 2 Channels - Front Panel 3.5mm Jack, Rear Recording & Storage Image Resolution: CIF / HD1 / D1 / 960H / 720P Video Coding: ISO14496-10 Industry Standard Video Bit Rate: CIF (Common Intermediate Format): 1536Kbps ~ 128Kbps HD1/D1: 2048Kbps ~ 400Kbps 960H: 2048Kbps ~ 400Kbps 720P: 4096Kbps ~ 400Kbps Select from 8 Levels of video image quality ranging from 1(Highest) to 8 (Lowest) Audio Bit Rate: 40Kbps Storage: 2 SD Card Slots, Up to 128GB each, Class 10 or higher SD card required Alarm Alarm Input: 8 Channels, select trigger for either less than 1VDC or greater than 5VDC Alarm Output: 1 Channel, 12V output Communication Ports RS485: 1 Port for communication or data usage RS232: 2 Ports for communication or data usage RJ45 Network: 1 Port of RJ45, for connection to an IP camera with a maximum of 1080P Software PC Playback A/V, files available for playback on PC. Limited playback is also available on MDVR Software Upgrade: via SD card Power Voltage Input: +8V~+36V 8～36VDC P Voltage Output: 12V (+/-0.2V) , Max 3A Video Output Voltage: 2VP-P CVBS output analog signal Dimensions 170 x 142 x 50mm including security cover 170x187x50mm

Page 8

Page 9

Page 10

Page 11

11 INFO: Check information Quad 4 Image Format: Number keys 1, 2, 3, 4 on the monitoring interface, are used to switch between quad view and single view; press the Quad View key to display 4 screens. You can press number 1/2/3/4 to display channel 1, channel 2, channel 3 and channel 4, respectively. RETURN: Return to the previous menu, and finally exit from the setup menu to the monitoring interface. PAUSE/STEP: Used to pause playing or play images at a single step. Press the key again to recover normal play speed. FRAME: Press this key to play a video in a frame rate. PLAY: Press this key to start playing (search the video file to be played and select, then press the key to play it.) FWD Forward key in four grades: 2X,4X,8X,16X REW Rewind key in four grades: 2X,4X,8X,16X NEXT: Page down or roll to the next file PREV: Page up or roll to the previous file PTZ: Auto, preset, call, zoom +, zoom -, focus +, focus -, aperture +, aperture -, PTZ, PRESET, RECALL, BRUSH: F1, F2, F3, F1 is a key to start functional test Important: Make sure remote is facing the front of the DVR during remote operations. If you install the DVR behind a wall or in a cabinet, the IR remote will not work.

Page 12

12 For these applications, our IR extender will allow you to place the DVR hidden behind a wall and use our ADD02CP. This IR/LED panel has a 16 foot extended cable. This panel provides feedback on the operation of the DVR. Never miss another recording due to issues that may occur over the years. PWR: Power on light. REC: Record light recording. HDD: For hard drive units flashes when recording ALM: Indicates an “Alarm” event V-LOSS: Video loss light: flashes when video loss. ERR: Error light IR: IR receiver The instructions for the ADD02CP will ship with the item. 2.2” 1.3”

Page 13

Page 14

14 To change the password Click USER SETUP in BASIC SETUP SECURITY SETUP # 1 turns password on/off # 2 Check box to modify a user #4 to modify the selected user # 3 ADD a user # 4 MODIFY a user # 5 DELETE a user # 6 SAVE To modify the “admin” check #2 and Modify #4 To add a new user click #3 ADD IMPORTANT NOTE for security reasons, there is NO retrieval option for passwords. WRITE THE NEW PASSWORD DOWN!

Page 15

15 USER SETUP To Access, use the following. Click on GENERAL Click on USER SETUP There are 2 levels of users: System user: Grants unlimited access and change privileges, including creating User Accounts, Passwords, and restricted access Rights General user: Provides Password, limited rights Password: 6 digits (numbers only) *Confirm the new settings are correct and save the file. After a User Account is entered and saved, it will be necessary to login again using the new Password. Because security reason there is NO RECOVERY MODE WRITE THE NEW PASSWORD DOWN!

Page 16

Page 17

17 DATE AND TIME (DATETIME) Click on GENERAL Click on DATE & TIME DATE TIME: THIS IS IMPORTANT for time-stamping when recording. This is also necessary to allow for file searching by date and time. Time: 24 clock or 12 hr. am/pm TIME ZONE: enter the desired GMT zone for your location. DST Switch: use to sets the parameters for daylight saving time option. The selected date and time will appear to the right of the section.

Page 18

18 Screen off: not needed Time Mode: if the unit has GPS tracking, the GPS will set time. Time Check: option for full option model Power Mode: ignition off or timer delay off Power Off: Delay: Use to set a delay. Voltage off: Use to set parameters for low power off. This function primarily used in command units. Maintenance: Leave set as default “on” VEHICLE SETUP To access, use the following: Click on GENERAL Click on VEHICLE INFO

Page 19

19 Enter information related to the driver and company. The DEVICE NUMBER is the only field required to have data entered. DEVICE SERIAL ID: predetermined, no input needed DEVICE NUMBER a unique number (Up to 7digits) to display on the video display and on recorded video DEPARTMENT: enter company name (up to 19 characters) DRIVER NAME: Drivers name or ID (Up to 19 characters) SIM NUMBER: phone number for the MDVR contained SIM Card if installed MILE ACCRUAL: Found on units with GPS Vehicle number: (Vehicle-Num) Truck number or any selected number to match the truck. FORMAT SD CARD To access, use the following: Click on GENERAL Click on FORMAT FORMAT allows for format of the SD card(s). NOTE: SD cards need to be formatted while in the DVR to work properly. This screen also supplies information about space available and space used.

Page 20

Page 21

21 Key settings that apply: Record Type Normal: Smooth video HIGHLY RECOMMENDED I Frame: Saves storage - video playback VERY choppy Live Mode: Number of screens shown REC Length: Playback file sizes. Select from 5, 15, 30, 45, 60-minute files. The factory Default is 15 mins. Overwrite: allows the MDVR to continuing recording over the oldest file. ALM does not apply Rec Off By ACC: Turns off the DVR when the ACC is powered off. NONE: Every camera view will be recorded per preset parameters. Factory preset and recommended ALL: Every cameras’ view will not be recorded CH: Choose a single specific camera view to not be recorded.

Page 22

22 MAIN CODE To access, use the following: Click on CHANNEL MODE Click on MAIN CODE This screen provides the ability to configure each of the MDVR’s five video channels to provide the optimum balance of Video Type, Frames per Second (FPS), Resolution, and Quality. This section will ensure the maximum file storage is achieved. The higher the FPS setting and resolution, the more storage will be required for the file. We suggest using the highest quality. NOTE: CH 5 is for the IP Camera connected to the RJ 45 connector. Record: Select from two options for EACH CAMERA. ON: Enable Video channel recording

Page 23

23 OFF: Disable video channel recording A screen with no camera attached will use up disk space Res: CH 1 – 4 D1, HD1, CIF, 960H (960H needs to be selected) CH 5: 720P, 1080P FPS: (1 to 30) Select the Frames Per Second to be recorded. The higher the number, the closer to real-time fluidity (30 FPS for NTSC and 25 FPS for PAL settings) action will be recorded. The default is 25. QUALITY: (1 to 8) Enter the record resolution setting desired with 1 being the highest quality. A higher-quality setting will require more file storage space yet supplies a more detailed video. AUDIO: Select from two options: ON: Enable audio recording (If selected camera channel has a microphone connected) OFF: Disable audio recording RECORDING SCHEDULE To access, use the following: Click on CHANNEL MODE The default setting is to record whenever the MDVR is powered. The first option allows for setting the same period of time for all seven days of the week. The following enables setting a period of time for each day.

Page 24

Page 25

Page 26

26 OPTIONAL: ADD02CP PWR: Power light indicates when MDVR has power. REC: Recording light indicates recording is functional. HDD: Hard Disk Light indicates Hard Disk is functional (This does not apply to DVRs that use SD cards.) ALM: Alarm Light indicates the following alarms: IO Linkage Alarm, Speed Alarm, G-sensor Alarm, Temperature Alarm, and HDD error alarm. V-LOSS: Video lost light. ERP: Error light indicates functioning errors. IR: Sensor for the MDVR Remote Control. To access, use the following: The Baud rate needs to point to “Panel” Click on PERIPHERALS Click on SERIAL

Page 27

27 WARRANTY Verity Rear Vision Systems A division of COMPONENT SOLUTION SERVICES (CSS) LIMITED ONE (1) YEAR WARRANTY 1. CSS products’ warranties are not transferable. The warranties apply to the retail consumer for one (1) year and covers against defects in material and workmanship. 2. Defective components will be replaced or repaired, based on a CSS evaluation of the component. In-bound shipping charges, based on the CSS rate allocated in the RMA (returned merchandise agreement), will be covered once the component has been deemed defective at the CSS warranty facility. The pre-assigned in-bound freight will be supplied upon return of the product. All repaired/replaced warranty parts shall be for the remaining duration of the original warranty time period. 3. CSS takes pride in our products and will aid in the processing of your components: a) All warranty claimants must have consulted our technical support department for trouble shooting and the acquiring of an RMA. Contact can be made via email at tech@verityrvs.com or call 574-807-6002. b) When the warranty claim is made, the consumer must establish the warranty start dates by presenting documentation regarding the date of retail purchase (e.g., bill of sale). c) Service performed by non-authorized service personnel may void all warranty claims. d) CSS will make no payments for system removal / system re-installing, mileage allowance, or transportation expenses. The limited warranty does not cover damage resulting from misuse, accident, modification or alteration to hardware or software, tampering, unsuitable physical or operating environment beyond product specifications, improper maintenance, or failure caused by a product for which CSS is not responsible. There is no warranty for any product with removed or altered identification labels. CSS DOES NOT PROVIDE ANY OTHER WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF IMPLIED WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU. 4. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

Page 28

28 Technical Support A service ticket can be filled out online to supply the quickest service. The service ticket can be easily found on our web site www.verityrvs.com or use the code to the right. Please have the serial number, which is found on the top of the DVR when contacting the service department. We take great pride in delivering the most dependable product in the industry. Each item was 100% QC tested and then we randomly recheck another up to 10% before it leaves our hands to you. We have a .034% issue rate with this product. Email Tech Support: Tech@verityrvs.com Phone Tech Support: 574-807-6004 Note: if you are an OEM, Fleet fire/rescue customer in need of tech support after hours or on weekends, leave a message and a technician will return your call as soon as one becomes available. a division of Component Solution Services 56600 Twin Branch Drive Mishawaka, IN 46545 574-807-6002 Toll Free 844-875-4799 We at Verity Rear Vision Systems would like to personally thank you for purchasing our product. Our company strives to supply the best products at a fair price. We care that you enjoy a safe driving experience.