simplebooklet thumbnail

The new "S" systems are quality, are true to drivers' needs, have our core principles built-in, and are backed by the name synonymous with true customer service. This series is geared to the price-sensitive market.

1
A division of
Component Solution Services, LLC.
56600 Twin Branch Dr.,
Mishawaka, IN 46545
wwwVerityRVS.com
Please read this manual completely before operating the SYSTEM
5-INCH “S” SERIES SYSTEM
Part # SM05S
© 2020 Verity Rear Vision Systems
Est. 2002 with over 18+ years of the
Latest Engineering, Highest Quality, Best Support
COST EFFICIENT
2
TABLE OF CONTENTS & PHONE NUMBERS
ABOUT US
PAGE 2
THINK SAFETY
PAGE 3-4
SYSTEM FEATURES
PAGE 5
SYSTEM COMPONENTS
PAGE 6-7
SYSTEM CONNECTIONS
PAGE 7-8
MONITOR OPERATIONS
PAGE 9-11
SYSTEM DIMENSIONS
PAGE 12-13
KEY OPTIONS
PAGE 13
WARRANTY
PAGE 14
TECH SUPPORT
PAGE 15
SALES
574-807-6005
TECH SUPPORT
WWW.VERITYRVS.COM
VERITYRVS
®
Our tech support is manned by
real people in front of all of our
powered-up systems prepared
to knowledgeably talk you
through an issue solution not
a person with no knowledge in
front of a spreadsheet of
prepared phrases. Verity=24/7
support for OEMs and Fleets.
3
ABOUT US
Component Solution Services, LLC offers the Verity Rear
Vision Systems
®
(Verity) to meet any requirements and price
point within the trucking, specialty vehicles, and RV industry.
Verity is also home to the Supreme View
®
line of specialty format
systems. Our standard cabled systems offer unparalleled
features into the trucking and RV industries. Designed for
professional drivers, Verity develops and markets products and
applications to transmit video, audio, and data either individually
or in all combinations. The company has also developed,
manufactured, and marketed different kinds of personal and
vehicle video cameras, DVRs, and accessories for the
commercial transportation, fire/rescue, and marine OEM
markets.
The photograph above shows our new 5,000 ft addition.
Use this barcode or
link to visit our
website
www.verityrvs.com
4
THINK SAFETY
Read our manual before operating
or installing this system.
Most likely, your system came pre-installed so the installation
section would be for reference.
Thank you for your
purchase of our Verity Rear Vison System
SM05S. When installed and used properly, your SM05S is
designed to deliver you years of trouble-free operation. This
manual contains important information required to properly
install and operate the unit. Verity units are designed for
quick installation by trained professionals in proper
installation environments. Our designs are based on
decades of working with vehicle manufacturers.
Verity products are intended to be installed as a supplement
and our observation systems and/or products are not
intended for use as substitutes for rear-view mirror devices,
or for any other standard motor vehicle equipment which may
be required to be installed on vehicles by law. Verity
products promote improving the vehicle operator’s field of
view. Our products are no substitute for proper defensive
driving techniques, observance of traffic laws, and motor
vehicle safety regulations.
Installation Location
It is unlawful in most locals for any person to drive a motor
vehicle equipped with a television viewer/screen located at
any point forward of the back of the driver’s seat (or in any
location that is visible, directly or indirectly) to the driver while
operating the vehicle. Our systems are designed to be used
primarily as a rear observation device.
DO NOT OPEN ANY COMPONENT. There are no
serviceable parts inside any of the components of the
SM05S. Opening the product will break the tamper indicators
and void the warranty. Contact our tech support if a problem
should arise: 574-807-6002. For faster response, fill out a
service ticket found on our website. www.verityrvs.com
5
WARNING
Do not place heavy objects on cables or cover
them with carpet or mats.
Do not place cables where they can be
crushed in any manner.
Our systems are designed as a driving aid.
Watching videos, broadcasts, DVDs and/or any
images other than intended driving assistance
cameras is prohibited.
CAUTION
To avoid damage to the electronic circuit, stop
using this product while doing welding work to
the vehicle and/or trailers.
Never immerse any component in water, and
do not employ spray cleaners. When cleaning,
use a damp lint-free cloth only.
Connect this unit only to other compatible
devices.
Although our products have built-in surge and
cross polarity protection, make sure all cables
are connected properly; improper cable
connections may damage the camera and the
monitor.
Cables should not be allowed to touch hot or
rotating parts, such as the engine, ventilator,
etc.
Do not locate the monitor near heat generating
vents or devices.
Turn off power to the monitor when connecting
the camera.
Monitors are not designed to be waterproof. (Our
SM07F waterproof monitor is the exception).
Exposure to water, such as rain, may damage the
unit.
6
SYSTEM FEATURES
MONITOR SPECIFICATIONS
(Monitor part #MK05S)
Screen size: 5-inch digital screen (16:9)
High Resolution: 800 × 480 Pixel (RGB)
System: PAL/NTSC selectable
Contrast: 400:1
Brightness: 450 cd/m2
Power supply: DC 9V~28V with reverse polarity protection
Operation temperature: -30°~80°C
Storage temperature: -20°~70°C
Monitor view angle: Horiz. L(70) R(70) Vert. UP(50) DOWN(70)
3 AV with shrink labels trigger wires,
Auto blue screen if no signal on the activated channel.
Size: 5 ½” (W) x 4” (H) x 2 1/8 Weight: 14 oz.
Features: Removable HD sunshade, LED blue light buttons, high-
quality processor, in-line waterproof fuse plus onboard resettable
fuse, easy to use OSD menu function via buttons: Mirror/Normal
image, plus horizontal flip, multi-language, high-output speaker
CAMERA SPECIFICATIONS
(Camera Part #C001S)
Horizontal Resolution: 600 TV Lines
TV System: NTSC
Image Type: 1/3 Inch Color CCD Sharp® (or equivalent)
(no cheap off brands used)
Effective Pixel: 510 x 492
Illumination: 0 Lux (built-in 17 high output IR LEDs for night vision)
Aluminum Housing
Waterproof: IP69K
Power Supply: DC 12V (power from the monitor)
Shockproof: 10G
Operating Temperature: -40°~70°C
Built-in Microphone
Viewing Angle: 170°
7
SYSTEM COMPONENTS
Weatherproof Camera
with nightvision
20-Meter Camera
“Fan” Style Mount
13-pin to 4-pin Monitor
Harness
5-Inch digital
LCD monitor
Manual
8
SYSTEM COMPONENTS
This monitor can be mounted on the dash and also on
horizontal and vertical surfaces. Make sure the view is
suitable for the driver to observe the images. Take care not to
block any necessary viewing area when mounting. Before
mounting the system, permanently hook up all connections to
ensure proper operation.
Mounting Monitor
After determining the monitor location, position the
monitor support bracket, mark the bolt hole location and
then drill the holes. Be careful not to drill into any other
surface that wires and components may be hidden.
Attach monitor Fan bracket
Connect one end of the power cable (wire) to the proper
connections. Connect the other end of the power cable
(plug) to the monitor; connect the monitor and the camera
with the 13-pin system connecting the cable. (see page 9)
Camera Connection
Thru-wall Gasket to Seal
Thru Vehicle Exterior
Waterproof Aviation
Connectors
Be sure to use the
vibrationi gasket when
installing the camera. It
is package with the
camera hex wrench.
9
CABLE CONNECTIONS
DC
Chassis Ground
Fuse
Camera two trigger wire
Camera three trig ger wire
Camera one trigger wire
CAM 1
CAM 3
CAM 2
Wire Connection Key:
RED wire to ignition hot (+) 10-26 volts
BLACK wire to ground (-) (please use a chassis ground
post)
BROWN trigger wire is for camera 1. Connects brown trigger
wire to backup light wire or backup beeper wire. This
connection is needed to activate the monitor when putting
the vehicle into reverse.
BLUE (CAM 2) trigger wire for accessory cameras (side
cameras etc.) DO NOT power this wire unless you intend to
trigger a second camera. It will be connected to your trigger
power source, such as a turn signal light wire.
YELLOW (CAM3) trigger wire for accessory cameras (side
cameras etc.) DO NOT power this wire unless you intend to
trigger a third camera
10
MONITOR OPERATIONS
Buttons from Left to Right
Switches cameras CH1 (default) CH2, CH3
Menu Control Button
Power Off/On button -
The red color is standby mode /- Blue color
is for when the system is powered
Volume Decrease / Menu Down
Volume Increase / Menu Up
Light dimming window
Not Used
11
MENU OPERATIONS
MENU OPTIONS
The menu button operates the menu:
The following are examples of how the menus work.
The down and up arrow buttons control decreases and increases.
Menu Press 1 time
PICTURE: Brightness, displays on the screen.
BRIGHTNESS
IIIIIIIIIIIIIIIIIIIIII…………………….. 20
Menu Press 2 times
CONTRAST: Contrast, displays on the screen.
CONTRAST
IIIIIIIIIIIIIIIIIIIIII…………………….. 20
Menu Press 3 times
COLOUR (Color): displays on the screen.
COLOUR
IIIIIIIIIIIIIIIIIIIIII…………………….. 30
Menu Press 4 times
VOLUME: displays on the screen.
12
VOLUME
IIIIIIIIIIIIIIIIIIIIII…………………….. 20
Menu Press 5 times.
ZOOM Toggles between 16:9 and 4:3 image ratio
Menu Press 6 times
“ICON” Image Orientation:
This selection flips each camera image individually both
horizontally and vertically. This allows for a correct image of
interior/forward-facing cameras.
Menu Press 7 times
Parking line functions
Menu Press 8 times
ACC Time time monitor stays on after the trigger wire is
deactivated. It can be set to 0, 2, 5, and 10-second delays.
SIDE CAMERA HOOK UPwhen adding a side
camera, set that camera delay to 2 seconds.
Menu Press 9 times
LANG (LANGUAGE): Show English as primary language”
displays on the screen.
LANG ENGLISH
Menu 10 times
RESET: Resets the monitor to factory setting
13
SYSTEM DIMENSIONS
14
KEY OPTIONS
C100Z Camera Cover
15
Verity Rear Vision Systems
A division of
COMPONENT SOLUTION SERVICES (CSS)
LIMITED ONE (1) YEAR WARRANTY
1. VerityRVS
®
products’ warranties are not transferable. The warranties
apply to the retail consumer for one (1) year and covers against defects in
material and quality. Cables are not warrantied.
2. Defective components will be replaced or repaired, based on a
VerityRVS evaluation of the component. In-bound shipping charges, based
on the VerityRVS rate allocated in the RMA (returned merchandise
agreement), will be covered once the component has been deemed
defective at the CSS warranty facility. The pre-assigned in-bound freight
will be supplied upon the return of the product. All repaired/replaced
warranty parts shall be for the remaining duration of the original warranty
time period.
3. VerityRVS takes pride in our products and will aid in the processing of
your components:
a) All warranty claimants must have consulted our technical support
department for troubleshooting and the acquiring of an RMA. Contact can
be made via email at techsupport@verityrvs.com or call 574-807-6002.
b) When the warranty claim is made, the consumer must establish the
warranty start dates by presenting documentation regarding the date of
retail purchase (e.g., bill of sale).
c) Service performed by non-authorized service personnel may void all
warranty claims.
d) VerityRVS will make no payments for system removal or system re-
installing, mileage allowance, or transportation expenses.
The limited warranty does not cover damage resulting from misuse,
accident, modification, or alteration to hardware or software, tampering,
unsuitable physical or operating environment beyond product
specifications, improper maintenance, or failure caused by a product for
which VerityRVS is not responsible. There is no warranty for any product
with removed or altered identification labels. VerityRVS DOES NOT
PROVIDE ANY OTHER WARRANTIES OF ANY KIND, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF IMPLIED
WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU.
4. This warranty gives you specific legal rights, and you may also have
other rights that vary from state to state.
16
Technical Support
A service ticket can be found online and completed to supply
the quickest service. The service ticket can be easily found on
our web site www.VerityRVS.com or use the 3-D code below.
Please have the serial number of the
system, which is found on the back of
the monitor when contacting the service
department. We take great pride in
delivering the most dependable product
in the industry. Each item was 100%
QC tested, and then we randomly
recheck another up to 10% before it
leaves our hands to you. We have a .024% issue rate for all
Verity cameras and monitors over the past eight years.
Email Tech Support: tech@verityrvs.com
Phone Tech Support: 574-807-6004
Note: After office hours calls will be answered or called back
as quickly as possible by one of our Tech Team. Please
note: Technicians cannot provide pricing or availability.
a division of
Component Solution Services
56600 Twin Branch Dr.,
Mishawaka, IN 46545
574-807-6002
Toll-Free 844-875-4799
We at Verity Rear Vision Systems would like to
personally thank you for purchasing our
product. We at Verity strive to supply the best
products at a compedtive price. We care that
you enjoy a safe driving experience.
Subject to change without notice © 2020 Verity Rear Vision Systems
®